Built a nice little PiKVM and deployed it in my NAS. The NAS is heavy and placed in a dark half-height place under the stairs so it’s awkward when things go wrong and you need hardware access.

The built KVM

For those that don’t know what PiKVM is: https://pikvm.org/

  • cygnus@lemmy.ca
    link
    fedilink
    English
    arrow-up
    12
    ·
    10 months ago

    So it’s a computer that lets you remotely control another computer? Is the advantage over SSH or remote desktop etc that you can interact with stuff outside the OS, like in BIOS?

    • redcalcium@lemmy.institute
      link
      fedilink
      English
      arrow-up
      19
      arrow-down
      1
      ·
      10 months ago

      That’s basically it. It guarantees you can always access your computer remotely, even if you broke your ssh, or accidentally messed up your network config, or can’t boot due to filesystem corruption and need to run fsck from recovery mode.

      • Prizephitah@feddit.nuOP
        link
        fedilink
        English
        arrow-up
        10
        ·
        10 months ago

        Exactly, it isn’t a replacement. It is redundancy in the form of a screen with keyboard and mouse directly connected, but accessibly from remote (my couch). It is far from my primary interface with the server.

    • misophist@lemmy.world
      cake
      link
      fedilink
      English
      arrow-up
      14
      ·
      10 months ago

      Yes. This is home-made out-of-band management, like HP’s iLO, Dell’s iDRAC, or generic IPMI. Not only is it a virtual KVM (keyboard/video/mouse), you can pass the host’s power button through this device so you can remotely power on or reset a hung or powered-off system, or mount and boot from a virtual floppy or ISO to completely reinstall the remote system.

      • MatFi@lemmy.thias.xyz
        link
        fedilink
        English
        arrow-up
        2
        arrow-down
        1
        ·
        10 months ago

        Cool, So actually something one could build out of anything with an USB, Ethernet port. But not sure how to add the Display receiver… They using a RPi for this as well. I don’t like that it occupies Video connector. Lots of systems only have a single one

        • Prizephitah@feddit.nuOP
          link
          fedilink
          English
          arrow-up
          6
          ·
          10 months ago

          It’s kind of the point here to occupy the video out as this is a server and has no screen connected otherwise. Normally it doesn’t need one.

  • dan@upvote.au
    link
    fedilink
    English
    arrow-up
    9
    ·
    edit-2
    10 months ago

    Wouldn’t it have been cheaper to get a motherboard with IPMI/BMC? Last I looked, the prebuilt PiKVMs were quite expensive.

    • Prizephitah@feddit.nuOP
      link
      fedilink
      English
      arrow-up
      9
      ·
      10 months ago

      Would’ve loved to gotten one of those. But the power consumption of a Xeon is a bit higher than I’d like. This was a nice to have, not need to. It was a Christmas gift from my wife 🥰

      • dan@upvote.au
        link
        fedilink
        English
        arrow-up
        5
        ·
        10 months ago

        Aww, nice gift!

        I’m using a workstation board in my server. Asus Pro WS W680M-ACE SE along with a Core i5-13500. Intel support ECC for consumer CPUs but only when using workstation motherboards :/. The IPMI on this board works well though.

    • Appoxo@lemmy.dbzer0.com
      link
      fedilink
      English
      arrow-up
      1
      ·
      10 months ago

      Don’t have some Intel CPUs Intel vPro making you also able to control the PC in a LVM manner?
      I havent tried it yet but my (so far) research suggests its possible and it would be a useful feature for those repurposing old workstation pcs as servers.

      • dan@upvote.au
        link
        fedilink
        English
        arrow-up
        1
        ·
        10 months ago

        I think so, but I don’t have any vPro capable CPUs so I haven’t been able to try it.

        • Appoxo@lemmy.dbzer0.com
          link
          fedilink
          English
          arrow-up
          1
          ·
          10 months ago

          I think some other CPU/MBs also have this feature.
          But I would giess they are only implemented in business scopes like the Pro/EliteDesk line from HP and the other SIs equivalent.

    • Fuck spez@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      1
      ·
      10 months ago

      Maybe, but power consumption can get steep with some server boards/chassis which might tip the balance over time.

  • SandySocks@lemmy.world
    link
    fedilink
    English
    arrow-up
    7
    ·
    10 months ago

    What hardware are you using to attach the Pi the PCI slot?

    I have a stock PiKMV V3 attached to my home server that seeing this I now need to upgrade!

  • Decronym@lemmy.decronym.xyzB
    link
    fedilink
    English
    arrow-up
    5
    ·
    edit-2
    10 months ago

    Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:

    Fewer Letters More Letters
    LVM (Linux) Logical Volume Manager for filesystem mapping
    PoE Power over Ethernet
    RPi Raspberry Pi brand of SBC
    SBC Single-Board Computer
    SSH Secure Shell for remote terminal access

    4 acronyms in this thread; the most compressed thread commented on today has 6 acronyms.

    [Thread #398 for this sub, first seen 3rd Jan 2024, 22:05] [FAQ] [Full list] [Contact] [Source code]

  • Fuck spez@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    2
    ·
    10 months ago

    Which pins go to the motherboard other than power/reset? Is that USB connector just passing through the keyboard and mouse signals?

    • Prizephitah@feddit.nuOP
      link
      fedilink
      English
      arrow-up
      5
      ·
      10 months ago

      There is power/reset and power/hdd LEDs as well as a USB 3 header for mouse and keyboard and flash/disc emulation. That way you can mount an image and boot from that if you want. Super handy for re-installs or troubleshooting tools.

  • lemmyvore@feddit.nl
    link
    fedilink
    English
    arrow-up
    1
    ·
    10 months ago

    So this board allows you to remotely control the PC you put it in?

    Is there a reverse project, that allows a PC to act as a PiKVM for another PC or laptop so they can be controlled remotely?

    • Prizephitah@feddit.nuOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      10 months ago

      Yes.

      Not aware of any such project. I’d assume you’ll need some hardware anyways as you need it for the level of access (ATX etc.). Not sure how that would be preferable to this.

      • lemmyvore@feddit.nl
        link
        fedilink
        English
        arrow-up
        1
        ·
        10 months ago

        I was thinking more about the basics, like USB input and getting the image+sound. For that you could get away with a special USB cable and a capture card. I’m just not aware of any software for it, I don’t think the original PiKVM stuff was ever ported to PC.

  • Valmond@lemmy.mindoki.com
    link
    fedilink
    English
    arrow-up
    1
    ·
    10 months ago

    An IP graphics card?

    Interesting. When is this more convenient than a virtual desktop (if it is what I guess it is)?

      • Valmond@lemmy.mindoki.com
        link
        fedilink
        English
        arrow-up
        1
        ·
        10 months ago

        So what does it do?

        For me a KVM is a switch for keeb, mouse and eventually a screen (or a virtual machine :-)

        • Prizephitah@feddit.nuOP
          link
          fedilink
          English
          arrow-up
          1
          ·
          10 months ago

          It’s a KVM in the same sense but instead of switching it provides the functionality over a web interface so that I can manage my server from my workstation or laptop instead of crawling in the space beneath the stairs where my server is if something goes wrong. Compare with IPMI.