Cool! Perhaps you want to censor all photos :)
Also, SAS -> Serial Attached SCSI
I definitely agree!
Exactly that. Router A
ip address add 192.168.1.1/24 dev eth1
ip address add 10.0.0.1/30 dev eth2
ip route add 192.168.2.0/24 via 10.0.0.2
Router B
ip address add 192.168.2.1/24 dev eth1
ip address add 10.0.0.2/30 dev eth2
ip route add 192.168.1.0/24 via 10.0.0.1
Does this make it more clear?
☺️
I use the IPP integration for that
Hmmm it seems that router B there should be a bridge. However, how comfortable are you with routing in general?
Traceroute from device in subnet A to device in subnet B
Note that the only way to do that in only two hops is to have the same router handle both subnets, contrary to what I said earlier.
No, not at all 🙂. I’m referring to a configuration in which the two routers are linked through another subnet (using a separate link between the two) and this link is the point to point link. You usually assign a /30 so you can have an address for each router. This way the traceroute shows three hops instead of just two. However, since you’ve already told us that this is not your setup, what I’m saying shouldn’t matter to you. If you’re curious though, let’s keep talking :)
No, with PtP I meant a point to point link on a dedicated interface just for the two routers. https://image2.slideserve.com/5192070/point-to-point-sub-interfaces-l.jpg
This works if B has an interface that is connected to the A subnet, but not if you have a PtP between the two routers
Then I don’t understand your topology. However, I still think you need the reflector on both routers
These are routed networks, and you need avahi reflector set up to mirror between A and PtP and between B and PtP
Nice!
How did you do it? Last time I checked it wasn’t supported
You’d need HomeKit secure video
Yes. And you should do something such as averaging if you want to fetch all the data I.e. to graph it. Grafana does it automatically iirc
You can use it as a VDSL modem if you have FTTC internet
https://www.homeautomationguy.io/blog/network-zigbee-adapters-with-zigbee2mqtt