Thanks for the suggestion.
I fuck numbers.
Thanks for the suggestion.
Where are you, if I may ask? Their Intel offers are not based in the US. Most of the time, I’ll access it from inside US, so I’m worried about the latency.
Without anything extra, there are three ways of doing it:
In each case, you’ll need a reverse proxy (e.g. Caddy) if you want secure https connections.
If you’re willing to spend money, the better way would be to proxy through a VPS (using something like a Wireguard tunnel). In that way, you won’t have to open ports on your home router. You can get a very cheap one since proxying doesn’t need much CPU power. Just choose one with enough bandwidth. I personally proxy most of my stuff through a $12/yr RackNerd VPS.
My setup looks like the following:
/etc/wireguard/wg-vps.conf on the VPS
-----------------------------------------------------
[Interface]
Address = 10.8.0.2/24
ListenPort = 51820
PrivateKey = ********************************************
# packet forwarding
PreUp = sysctl -w net.ipv4.ip_forward=1
# port forwarding 80 and 443
PreUp = iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 80 -j DNAT --to-destination 10.8.0.1:80
PreUp = iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 443 -j DNAT --to-destination 10.8.0.1:443
PostDown = iptables -t nat -D PREROUTING -i eth0 -p tcp --dport 80 -j DNAT --to-destination 10.8.0.1:80
PostDown = iptables -t nat -D PREROUTING -i eth0 -p tcp --dport 443 -j DNAT --to-destination 10.8.0.1:443
# packet masquerading
PreUp = iptables -t nat -A POSTROUTING -o wg-vps -j MASQUERADE
PostDown = iptables -t nat -D POSTROUTING -o wg-vps -j MASQUERADE
[Peer]
PublicKey = ********************************************
AllowedIPs = 10.8.0.1
/etc/wireguard/wg-vps.conf on my home-server
---------------------------------------------------------------
[Interface]
Address = 10.8.0.1/24
PrivateKey = ********************************************
[Peer]
PublicKey = ********************************************
AllowedIPs = 10.8.0.2
Endpoint = <VPS-DDNS>:51820
PersistentKeepAlive = 25
Now, just enable the tunnel using sudo systemctl enable --now wg-quick@wg-vps
. Make sure that the port 51820, 80, and 443 are open on the VPS. Now, allow 80, 443 through the firewall on the home-server (not on the router, just allow it locally), and it should work.
I’m afraid that I don’t have any guides. But, you’re halfway there anyway. Which one of these methods do you prefer? I can maybe give you some pointers.
I have a wireguard tunnel set up between my home server and the VPS, with persistent keepalive. The public domain name points to the VPS, then I have it set up (simply using iptables) so that any traffic there in port 80 and 443 is sent back to my honeserver and there it’s handled by caddy, and sent to the actual service.
The only ports I need to open are 80 and 443 on my VPS to make this setup work. So, no open ports on my local machine. This does however require you to pay for VPS. Since you aren’t doing much on it though, you can get away with a cheap one. I have a $12/year VPS from Rack nerd that I use for this job.
For completely free options, you can do one of three things. (That I can think of. There are probably more ways.)
P.S. If you need help setting any of these up, lmk.
Thank you for your service.
I currently use Wiki.js but it’s a bit too much. The image size is around 500MB. I don’t see why I need such a huge program for hosting essentially text files and some images.
From the comments, DokuWiki with a modern theme, Fossil-SCM, and MkDocs seem nice. I’ll probably try some of these during the weekend.
Hadn’t heard of it before. Looks promising, thank you.
deleted by creator
Are you an elf? We humans usually don’t live that long.
*Expected rage
Try out fileshelter. It’s super lightweight and works pretty reliably.
Adding to the discussion, if you want to watch anything that’s not mainstream (i.e. non-western, or arthouse), you’re basically supposed to either wait for it to stream on Mubi or get a Blu-ray/DVD (that are often out of circulation if it’s more than 5 years old). So the only real option is pirating.
I don’t, because I switch it with something better if something like that happens.
Games are one of the very few things that I always pay for. Steam is mostly responsible for that. Also, music. But nowadays I do store some of my own music because I can have lossless that way.
I can’t permaseed for tv shows due to storage limits, so I use autoremove-torrents to automatically delete stuff based on the tracker.
I’m kinda in the same boat, except for a specific private tracker. It’s a local private tracker which has a ton of exclusive stuff in my native language, and most of the users also speak it so there’s a communal aspect to it. But otherwise, yeah. I also tend to prefer public trackers, especially for more mainstream stuff.
Right? Who in their right mind cancels Mindhunter?
Thanks, I’ll check it out.