Drag the main BDMV folder that has stream and playlist subfolders into handbrake. It will read the playlist files and show you possible combinations that you can choose to encode from. It will also grab chapter and subtitles.
At least it should. Though makemkv as others note can do this itself.
Just beware last I checked they’re not very active compared to the reddit. Getting into a lot of trackers on open signups tends to rely on someone posting about it within hours of it happening. Unfortunately less people use lemmy so they’re less likely to post about it here, it’s not like they have some person in all the trackers who keeps an eye out, it’s entirely up to someone noticing and making a post. Some may open for only 24 hours (hawke tends to I think).
So regardless of where you see something open, if you have a place you want, I recommend signing up immediately within minutes rather than waiting even an hour as you never know how long it’s been open before it was posted about or how soon it will close. Just make sure you read the rules and any newsposts for new users within the first 24 hours if you can as some places may require activity in the first 24-48 hours for new accounts.
I’m pretty sure the megathread lists a website that tracks signups though in my experience it’s not as good as the subreddit. You really just have to watch that space. (Focus especially on checking daily through the winter months, in my experience lots of places open up around Christmas though around Christmas is pretty vague, some will open up around last week of or mid November, others early December, others in early January so it’s a patience game). You can create an rss feed for the sub so get just the posts fetched for you when they occur.
TL is one of the best. If you need help filling some holes I’d strongly recommend the semi-private rutracker. You can sign-up using browser translation tools and then add it your search stack (it has jacket support) and search using English titles. It’s surprising how many seeded BD remuxes you can find there, they even have stuff I haven’t found on any other PT’s below PTP level. As it’s semi-private there are no real requirements for seeding or ratio though they do track that stuff on your account and give little badges for helping seed. Rutracker also as the other commenter mentioned is pretty strong on CD-rips and music. They’re very weak on western TV though.
LST is really good. Strong requests and great bonuses system just for keeping seeds going. They have freeleech on open signup and there’s a pool people can fill up to enable it routinely as well. Points can be traded for upload credit so even if you don’t succeed in actually seeding you can maintain ratio. Be sure to check out their Christmas advent calendar (TL does this too) for free points, some people get lucky and get millions of points and you’re sure to get thousands, probably tens of thousands just for checking in daily in December and that can easily boost you to enough credits to buy enough upload to get over a TB. Once established it’s not at all a tough tracker though I’d still prefer TL over it if they have the same stuff because TL has a lower size threshold for automatic freeleech and a lower ratio req.
The AvistaZ network of sites can be pretty good for obscure content but they’re stricter than I’d like as they require login every 60 days and download of a torrent every 3 months or you get banned which seems easy but if you’re not using them for much it becomes a chore you have to maintain and if you’re on multiple of these sites it applies independently. Cinemaz in particularly is good if you have tastes for arthouse, obscure, and foreign films that you’re struggling to find elsewhere. It doesn’t have mainstream releases though. AnimeZ is pretty good for anime though generally most stuff can be found on nyaa or other open sites. PrivateHD is fine, I find myself mostly finding stuff on TL and choosing it over their listings but occasionally they have a better version of something. Their old rules were better, you could go longer with some inactivity that was more realistic.
If you like old western cartoons then something like Oldtoons would be a great idea to try and get into. That or a general old content specializing tracker though I can’t mention the one I’m familiar with by name as they prefer not to be talked about.
If you see hawke uno opening up I’d suggest joining them as well. More encode focused, heavy focus on HEVC but they have an awful lot of stuff from their internals including TAoE and HONE and lots of cross-seeding ability as most QxR stuff gets uploaded, no ratio, just points system and you get a bunch at the start, earn more by seeding, keeping a lot of stuff seeding and you’ll never want for the ability to download or worry about running out.
Yes. It’s incredibly powerful but easy to use for a basic purpose like editing a line or converting formats.
Open the web subtitles in subtitleedit. Change format to ass (advanced substation alpha). Save and re-embed using mkvtoolnix.
Positioning of multiple lines works well with ass and VLC shouldn’t have an issue reading and displaying. Not sure if YouTube includes the positioning data in their subtitles though. You could recreate that in subtitle edit (free software btw, dk web domain I believe) but it would be a bit of an annoyance.
edit: Corrected domain name. Not German, but nikse is it as OP has suggested
All the big pirate sites use them though. Even private ones like TL. If they don’t they get DDOSed. They all turned it on over the past year or so after being badly attacked.
Nothing. It’s an automated. Just stop doing it and it’ll decay with time.
As others mentioned having a good encoder is an issue for AAC. And some skills in using it, tuning, etc.
Nearly all quality releasers now use AC3/EAC3 or FLAC. Tigole is the last one who uses AAC to my knowledge and the rest of the QXR group rolls their eyes at it.
You’re not going to get a meaningful reduction in bitrate and file size with AAC over EAC3/AC3 without loss of quality. We’re talking maybe you can shave 2-300kbps off an AAC version versus an AC3 5.1 track. And it’s tricky. So much so no one other than that one person I mentioned bothers. At least no one accepted in the higher echelons as competent in creating acceptably transparent encodes.
If a source has EAC3 (itself capable of up to halving the bitrate required vs AC3) or AC3 I’d recommend keeping it as they tend to already be efficient. They’re also universally compatible as codecs. Re-encode those big 1500kbps DTS tracks and those even bigger monster lossless Dolby and DTS tracks but I’d leave efficient codecs like AC3 alone.
That said it’s up to you what sounds good. If you’re using lower end stuff and can’t tell the difference after trying a few different test videos with different types of sounds then go for it.
/r/opensignups (sadly the lemmy version seems abandoned at the moment).
Monitor that daily if you can. Torrent leech in particular should be opening their doors soon for open registration (they usually do in spring, if not it won’t be long as they do so twice a year anyways). TL is a great starter and honestly many people will never need more. Very easy to maintain on with great free leech on anything over a certain size which ends up meaning all remuxes and most TV show seasons.
/r/opensignups (sadly the lemmy version seems abandoned at the moment).
Monitor that daily if you can. Torrent leech in particular should be opening their doors soon for open registration (they usually do in spring, if not it won’t be long as they do so twice a year anyways). TL is a great starter and honestly many people will never need more. Very easy to maintain on with great free leech on anything over a certain size which ends up meaning all remuxes and most TV show seasons.
Don’t bother with M-discs. They only provided a meaningful advantage in the DVD era. I’ve researched this a bit myself and consensus at least in the data hoarding community is use 2 Blu-ray Discs from two different batches (bought 6 months apart). Which still comes out cheaper or the same as branded M-Discs. (Though that may be overkill and truth be told as long as you test the disc and it’s data done months after writing you’ll tend to catch any rare bad ones)
Truth is, quality Blu-ray Discs have all the features that would engender M-disc type longevity in the design spec. Just make sure they’re not low to high (LTH) discs which are inferior but always marked as such at least.
Don’t get no-name cheap ones either, get Verbatim, Sony, some other good Japanese brand. For Verbatim specifically their discs marked MABL on the package are better.
Always burn data at lower speeds too, less errors.
Blu-ray remuxes (even a public site like rutracker keeps a lot of English commentary tracks in the fuller size releases), certain releasers like QxR, Sartre, HEVK who tend to include them. Someone called budgetbits on leetx also tends to include them alongside rifftrax. Important thing is to check the media info these include on the website to see if commentary tracks are present.
Most remuxes have commentary tracks passed through. Heck, good encoder groups like QxR, TAoE and many Internal’s retain them.
I’ll agree remuxes generally drop extra video files though you don’t strictly need an iso for those, just a full BD disc dump in folder form which are far more common than ISO’s though far less common than single file remuxes.
I don’t think LoTR 4K’s changed the extras and behind the scenes from 1080p either so finding disc folder dumps of the old HD releases should suffice for OP if that’s all they want.
Most useful unique website thing rarbg had by far was full mediainfo listing for every single upload on site. You could immediately tell what you were getting and even dead torrents became useful by virtue of retaining chapter data that could be applied to another release.
Also, call me skeptical but IMO without access to scene FTP’s or week-1 access to (and automation on a large scale of re-uploading from) cabal trackers like BTN to get the good content from your site frankly risks ending up just another mirror among many others like lime torrents for existing public net and low hanging private tracker fruit. (If you have mediainfo for all files that adds a lot of value though)
IMO the real need left by rarbg is not for more re-hosting of content many others have but for publishing web-dl’s others don’t have, not of just new series (which everyone does as ep’s drop) but older movies and older series without other good 1080p or 4k releases available. Even today I see many old TV series the only HD releases available are old rarbg packs and this includes across multiple of the biggest PT’s.
Of course I wish anyone willing to run a big general tracker luck (assuming they’re honest and intent isn’t to distribute malware ofc).
Looking up technical specs for the drive it’s often mentioned on data sheets (often as conventional magnetic recording drive or else shingled if SMR). Other than that third parties have compiled lists and many but not all Amazon pages in tech specs mention it if you look closely. Try searching drive-model and cmr and then smr and see what comes up. Beware some drive families different sizes of drive may be cmr vs smr. WD red pro and ultra star DC line are all CMR, WD blues many are SMR. WD black as far as I know are all CMR. WD red (non-pro) can be SMR I believe.
I’ll be honest, the real difference is getting a 7200 vs 5400 RPM drive, particularly one with a larger cache, I’d always go for 7200 except for purely offline backup stuff.
In terms of external drives and shucking, it’s largely a crapshoot. You can try searching what drives others found in a model, however they’re subject to change.
Bottom line: If money is tight and it’s just you, you can absolutely do SMR and 5400 RPM external drives and have a smooth experience as long as we’re talking re-encodes not raw Blu-ray remuxes (I have seen an external 5400RPM SMR drive choke and fail trying to smoothly play a file at 24MB/s bitrate but it worked fine with 10MB/s re-encodes, even those with burst rates of 17MB/s). If you can afford a bit more try to go 7200 and CMR.
Beware MDD at the top is alleged to sell drives they’ve refurbished which are essentially used but with wiped smart. Other cheap deals… check sellers. If it’s not sold and shipped by Amazon it could be slightly used drives (usually third party sellers do a mix so some people get brand new, others not so much). Also beware third party sellers and Amazon itself often sell OEM drives without warranty. I always check the serials online before opening the anti-static bag to make sure it’s in warranty.
Also: shucks.top
You need to wait and watch for the good deals but they come around multiple times a year.
Also, understand there are certain storage ranges to get these prices. Generally 8-18TB drives are best deals per TB. You pay a premium for 20-22 top size drives as well as for smaller drives like 2-4TB. 14TB seems to be the current sweet spot most of the time.
Lastly. Understand SMR drives are alright for backups but not ideal for streaming high bitrate content from or using to seed files. CMR is better.
OP said money was tight.
And why pay more for less? Over the purchase of 3 hard drives I save enough to get a fourth “free” off the difference in savings.
$4x14tb=$56 for example.
But please. Continue to pay whatever you want. More cheap drives for me.
$20/TB is a bad deal.
You can get WD Red Pro’s on sale twice a year for $16/TB.
Further you can order unused data center and enterprise drives for anything from $11-$16/TB and those things are built to take way more use and abuse than home users can throw at them.
I would not pay above $17/TB for traditional magnetic spinning disk storage.
Not really. This requires a sophisticated attacker. I’d suggest updating soon but I doubt most people are at risk. As always verify downloads before running them and check where you should be getting updates and if you’re sent to a sketchy file host try to find updates from the official website instead.
The biggest risk is MTM interception and replacement of the python executable if you try and use the search tool for the first time. I suppose avoid doing that until you update the client from their website.