I have zero trust in QNAP. QNAP knowingly sold several NASes with a known clock-drift defect in their Intel J1900 CPUs and then refused to provide any support. A bunch of community members had to figure out how to solder a resistor to temporarily revive their bricked NASes in order to retrieve their data. https://forum.qnap.com/viewtopic.php?t=135089
I had a TS-453 Pro and my friend had a TS-451. Both mine and his exhibited this issue and refused to boot. After this debacle and the extreme apathy from their support, I vowed to never buy a pre-built NAS.
Not to mention the sheer amount of security vulnerabilities they constantly have in their products. I never recommend QNAP for that reason. Out of the box solutions I only recommend Synology. Selfbuild route is uraid and my personal fav. Truenas scale.
More than likely. Since the description clearly states “8x3.5 HDD Hot-Swap drive bays.” It’s not the only case of similar form factor that you can get 8 hot swap drive bays. There are literally tons of NAS case designs to choose from.
I’ve built every NAS/home server I’ve ever had. There’s lots of options out there for the case as well. You could take an SFF Mini ITX case with a single 5 1/4" drive bay and put an icy dock 8 x 2.5" SATA backplane in it. Don’t know if icy dock (brand) is widely available in Europe…
Just pointing out that if you imagine it (form factor with 8 hot swappable drives) there’s probably a solution to build it from scratch.
You could do all that, yes - but that’s not really “replacing” a Synology IMHO. The point is that you don’t really have to think about putting it all together correctly - put the drives in, install your OS of choice and that’s it.
Man, I have GOT to try Truenas Scale one of these days. I see it recommended so often, but I was just too used to a standard Linux ecosystem to bother learning something new. I am assuming it gets you closer to the feel of a pre-built NAS during administration tasks compared to Cockpit and a SSH session lmao.
I think I am just always afraid of being locked into a specific way of doing things by a vendor. I feel like I would get annoyed if something that I could do easily on standard Linux was harder to do on Truenas Scale.
For sure. It’s basically a NAS software appliance. You just need to bring your own x86 hardware. Truenas core was good, but they will stop actively developing soon in favor for scale.
I have it running both hardware (backup) as well as virtualized (with a special sas/sata card as PCI pass thru). Works like a charm.
Do it anyway and put an x86 OS on one of the “standard UEFI” versions. There’s no other Hardware better on the market for this - even self build isn’t going to come close, there’s simply no case with 8 hotswap slots (for example).
I have zero trust in QNAP. QNAP knowingly sold several NASes with a known clock-drift defect in their Intel J1900 CPUs and then refused to provide any support. A bunch of community members had to figure out how to solder a resistor to temporarily revive their bricked NASes in order to retrieve their data. https://forum.qnap.com/viewtopic.php?t=135089
I had a TS-453 Pro and my friend had a TS-451. Both mine and his exhibited this issue and refused to boot. After this debacle and the extreme apathy from their support, I vowed to never buy a pre-built NAS.
Not to mention the sheer amount of security vulnerabilities they constantly have in their products. I never recommend QNAP for that reason. Out of the box solutions I only recommend Synology. Selfbuild route is uraid and my personal fav. Truenas scale.
Get an x86 Qnap and put Truenas Scale on it - there is no case in that form factor in existence.
Get an x86 Qnap and put Truenas Scale on it - there is no case in that form factor in existence.
https://www.newegg.com/black-jonsbo-n3-mini-itx/p/2AM-006A-000E1?item=9SIAY3SJYT0310&cm_sp=SP-_-974336-_-0-_-1-_-9SIAY3SJYT0310-_-nas+case-_-case|nas-_-1
Does this have a backplane?
More than likely. Since the description clearly states “8x3.5 HDD Hot-Swap drive bays.” It’s not the only case of similar form factor that you can get 8 hot swap drive bays. There are literally tons of NAS case designs to choose from.
I’ve had a look and sadly, they are not available in Europe (at least for any reasonable price).
I’ve built every NAS/home server I’ve ever had. There’s lots of options out there for the case as well. You could take an SFF Mini ITX case with a single 5 1/4" drive bay and put an icy dock 8 x 2.5" SATA backplane in it. Don’t know if icy dock (brand) is widely available in Europe…
Just pointing out that if you imagine it (form factor with 8 hot swappable drives) there’s probably a solution to build it from scratch.
You could do all that, yes - but that’s not really “replacing” a Synology IMHO. The point is that you don’t really have to think about putting it all together correctly - put the drives in, install your OS of choice and that’s it.
Man, I have GOT to try Truenas Scale one of these days. I see it recommended so often, but I was just too used to a standard Linux ecosystem to bother learning something new. I am assuming it gets you closer to the feel of a pre-built NAS during administration tasks compared to Cockpit and a SSH session lmao.
I think I am just always afraid of being locked into a specific way of doing things by a vendor. I feel like I would get annoyed if something that I could do easily on standard Linux was harder to do on Truenas Scale.
For sure. It’s basically a NAS software appliance. You just need to bring your own x86 hardware. Truenas core was good, but they will stop actively developing soon in favor for scale.
I have it running both hardware (backup) as well as virtualized (with a special sas/sata card as PCI pass thru). Works like a charm.
Wow, did not know this…
I think i will accelerate my plans for a new NAS lol
Do it anyway and put an x86 OS on one of the “standard UEFI” versions. There’s no other Hardware better on the market for this - even self build isn’t going to come close, there’s simply no case with 8 hotswap slots (for example).